Dry foam carpet cleaning routine methods of operation

Cleaning Precautions:

Check motor control, with particular attention to electrical plugs and wires.

Various parts of the machine installed only after the power plug into the socket.

Thrown as far as possible the wires behind the machine.

Before starting work, check whether the sticky carpets and rugs tight whether bleaching.

The wooden and iron furniture, paper cards and carpet separated.

Inside the vacuum cleaner and wipe clean all parts.

Will hand brush and scrub brush machine wash.

The washing machine water tank to be drained, wipe clean.

Cleaning spray.

Cleaning bucket, wipe after handstand storage.

Conventional cleaning methods:

Gather the required tools a while checking equipment is intact. Check the motor's electrical plugs, wires and so on.

Two signs will be placed in a conspicuous place.

Three try to move away furniture.

Four carpet surface using a vacuum cleaner to suck the dust.

Five if the carpet is not entirely artificial, carpet cleaning before checking whether all corners sticking tight.

Six with a white cloth or white paper towels stained water cleaner is not in a discreet corner, try to check whether the carpet discoloration.

Seven carpet if stains removed with detergents.

Eight of the furniture will not move away with a tissue paving.

Nine label according to manufacturer instructions, the amount of the bucket cleaning agent to clean water, and then with a good reference detergent into the washing machine tank, the remaining into the sprayer.

Ten compared with a sprayer to spray on the dirty part of pre-cleaning solution.

Eleven will open all doors and windows.

Twelve if necessary, with a pressure sprayer to wet the brush scrubbing machine.

Thirteen entrances and exits from the most distant from the start, using the method of overlapping back and forth, careful not to make the carpet too wet.