Sprayers usually Troubleshooting

1, the switch leakage. Switch asbestos gasket wear or abrasion may cause the switch switch leakage, should be replaced with new washers or asbestos.

2, the switch is not flexible. bottle sprayer long home unused, switches and embroidered turbid due to the liquid, remove the switch into the kerosene cleaning, erasing rust, coated with suitable lubricant installed, tighten the switch cap can be.

3, do not play into the gas chamber, under the pressure does not focus on the joystick. May be due to hardening shrinkage or cracking or the cup bottom of the cup nut loosening caused. Cup should be little pressure to open or replace it with new cups, animal oil immersed lubrication after expansion installed, coated with a little oil, and tighten the bottom nut.

4, atomization quality poor. There may home garden sprayer nozzle clogging, the filter casing valve is blocked or out of the water and other contaminants stay put. Should clear the nozzle to remove debris; open the casing if the casing should be cleaned clogged strainer, check valve, remove dirt.

5, automatic air chamber piston rod rose, capping the top to take in water. Or more due to the gas chamber bottom wall cracks sealing off or valve housing glass ball was clogged, not months or cup seal valve damage caused. Application tin welding repair cracks, remove body debris, replace cup.

6, the gas chamber lid gland leakage or water leaks. The reason is skin damage or flange gasket and sealing off the gas chamber, replace the washers or soldering desoldering place.