Ultra low volume sprayer after use guidelines

After each use, to the tank, the residual liquid infusion tube release, the whole machine wipe clean; chemical sprayer spray after the operation, in custody prior to collection, in addition to the tank, the liquid inside a clean residual oil poured outside , but also a comprehensive cleaning, metal parts to rust oil painting, and then kept in the shade.

Faults and troubleshooting ① reduce the amount of spray or not to home garden sprayer spray. Repair, if found to be incorrect throttle valve spool position can be a good re-spool position; infusion switch if they are blocked, the infusion should be cleaned switch; throttle orifice if they are clogged, clean the throttle valve Kong; the case of the liquid-axis head clogging infusion should be cleaned shaft hole; if they are not pressurized tank or leak, refillable pressurized connector with the notch toward the fan; the case of tank lid is not tightened should be re-tighten the tank lid. ② obviously thick fog particles or transfer cage speed is low. If found to be gasoline engine speed is not enough, you should adjust or repair gasoline; cage bearing the case of oil, and add lubricant bearings should be cleaned; if they are bearing wear, should be replaced with new bearings; tumble if they are clogged or broken nylon nets should be cleaned or replaced grille.